Stage lighting lamps and lanterns also need to be maintained. The lamps and lanterns can prolong the life of the lamps through reasonable maintenance and maintenance. Next, I will share with you the daily maintenance and maintenance of the stage lighting lamps and lanterns.
1. Pay attention to the high temperature of the lamp
Some lamps and lanterns have high wattage, and they will naturally heat up when they emit light. Therefore, you need to pay attention to controlling the temperature of the lamps. Generally, the temperature of stage lighting lamps and lanterns under normal use is acceptable if the temperature is lower than 40 degrees Celsius. This value needs to suspend the use of cooling lamps.
2. Prevent high voltage and electric shock
Stage lighting needs to be used cautiously in thunderstorms or humid environments;
Each light fixture must be correctly connected to the ground wire at the site, and the electrical installation must be carried out in accordance with the standard;
When installing or replacing the lamp bulb, it needs to be powered off;
3. Clean the lamps and lanterns regularly
For stage lamps with air outlets, attention should be paid to regular cleaning of the air inlet and outlet; the time can be a 30-day cycle
Daily maintenance and maintenance of stage lighting
Maintenance method of lamps:
If the lamp has dust, smoke and particles will damage the appearance of the device, and even cause overheating and damage the device. Therefore, before disassembling the casing, be sure to disconnect the power supply and wipe the device casing frequently. It depends on the working environment. Do not operate the computer moving head lamp when the ambient temperature exceeds 40 degrees. When using it, it must be grounded, moisture-proof, drained, and used correctly. voltage range;
One, keep it clean
Maintain the product regularly every month. Be careful when wiping the optical components. Make it work in a clean and clean place. The surface of the optical components is easy to be scratched and cracked. Just wipe it with alcohol. Check the filter regularly and clean up the blockage. clean
Clean the fans and vents to ensure the cooling effect of the bulb, check the appearance of the lamp, whether the housing is firmly installed, and whether the screws are all locked.
Second, wipe the optical components
1. Disconnect the power supply, let it cool completely, and remove the lamp cover
2. Use an air gun to blow off the surface dust and particles of the parts
3. Use a soft cloth or cotton swab to wipe off the dirt and smoke on the surface of the component
Third, replace components
1. Do not short-circuit the temperature control switch or the fuse directly, and replace the defective or fuse with the original manufacturer's model parameters.
2. Keep flammable fuel (alcohol, gasoline, paper) at least 1 meter away from the lamp to prevent the high temperature of the lamp surface from igniting other flammable materials.
3. High-power moving head beam lamps are not non-combustible objects, because the surface cannot be close to the fire source for a long time within one meter
Filters and other items cannot be placed on the 3 lenses in the lamp body.
4. The outside of the head beam lamp will become very hot during long-term use, so when replacing the bulb and other parts, wait until the lamp cools to the indoor temperature.
