The controller of LED wall washing lamp adopts the treatment process of high-quality aluminum and surface baking paint, which has good heat dissipation effect and good sealing, effectively preventing dust and rain from entering the controller; the controller can flexibly change the speed and mode of the lamp according to the button, the actual effect of the lamp is related to the performance of the lamp, and the volume is related to the programming in the SD card; each controller will have a SD card interface, It is convenient for customers to control the color, light-emitting mode and sound effect of lamps through the controller; the lamp signal line can be installed according to the English prompt on the controller, GND represents the common negative pole, tx1-tx8 represents the positive pole; the innovative technology design is adopted, and the gradual change is soft, which can meet the needs of various animation effects; each controller uses the same speed and is connected to the same power grid, Can automatically achieve the synchronization of the overall animation, without wiring, no installation distance limit.
Precautions for installation of LED wall washing lamp controller
1、 Please turn off the power before installation to avoid electric shock due to improper operation;
2、 Before installation, please check whether the voltage of all marks on the controller is consistent with that of the connected input voltage, so as to avoid damaging the controller;
3、 In order to ensure the service life of the product, please no longer use it in the place with strong acid mist, and pay attention to shockproof during installation and transportation;
4、 Before installation, ensure that the installation position can bear 10 times the weight of the product, and install in a flat place without vibration, swing and fire hazard;
5、 If the lamp body wire is damaged, please immediately cut off the power and stop using it.
The parameters of LED wall washing lamp are very detailed in the equipment manual. As long as we carefully refer to his various parameters, you can know whether these equipment are the real equipment we need. It's also very helpful for us. As long as we know the parameters of these devices, then we can certainly make better use of these devices. In the development process of LED wall washing lamp manufacturers, we must be able to grasp the development trend of products. Because only when we can better grasp the development trend can we let us know the next development strategy of your development, which is a very guidance for our development.
