Installation and wiring instructions of external control wall washing lamp controller:
High power LED wall washing lamp can be installed and used individually or in combination. What will happen in the installation of wall washing lamp? Unreasonable installation of controller wiring will cause all lamps not to light up. How to install and connect the external control wall washing lamp?
Wiring description of external control LED wall washing lamp controller:
The information wire of the controller is three core wire, A1 is connected with blue, B1 is connected with green, and red is connected with GND. The signal must come in from the male end and come out from the female end of the LED wall washing lamp. The power supply is two core wire. The brown of the two core wire is connected with the positive pole of the switching power supply, and the blue is connected with the negative pole of the switching power supply.
Precautions for use of LED wall washing lamp
1. Pay attention to shockproof during installation and transportation of LED wall washing lamp.
2. Before installing the LED wall washing lamp, ensure that the installation position can bear 10 times the weight of the product. It is installed in a place without vibration, swing and fire hazard.
3. The LED wall washing lamp uses the power supply consistent with the mark on the product.
4. There are precision components in the LED wall washing lamp, please do not disassemble it without permission.
5. If the LED wall washing lamp fails, please send it back for repair.
It is obvious that the LED wall washing lamp has a bracket, which can be adjusted flexibly according to the requirements, and has a large scale, while the LED line lamp rarely has such a large scale.
In addition, most of the LED wall washing lamps are square, and the appearance design of the LED wall washing lamp is not fixed because of its own bracket.
Led wall washing lamp is a kind of flexible decorative lamp with low power consumption, long service life and easy bending. It is generally applicable to the outline of buildings and the production of billboards.
Led wall washing lamp, the image is to let the light wash the wall like water. It is mainly used for architectural decoration and lighting, and can also be used to outline the outline of large buildings.
In terms of the use parameters of lamps and lanterns, the two are also different. For example, in terms of the power of lamps and lanterns, most of the LED wall washing lamps are of high power, while most of the LED line lamps are of low power.
When the LED wall washing lamp is installed, it depends on the lighting height requirements, and there needs to be a certain interval between the LED wall washing lamp and the wall. Only the high-power LED wall washing lamp can do it.
And the LED wall washing lamp is small power, it is difficult to do. It's more difficult to wash the LED wall and heat dissipation.
