The radian of LED wall washing lamp is usually narrow, medium and wide, which are about 20, 50 and 120 degrees respectively. At present, the long range of high-power products is about 5-10 meters. If you use it outdoors, you should pay attention to its working temperature. If you can't bear too high temperature, its practicability will be greatly reduced. Generally speaking, the temperature of standard led wall washing lamp is generally controlled at 40-60 ℃.
In the production process of high-power wall washing lamp, anti-static measures need to be paid attention to, such as the manufacturer to develop special work regulations, staff should wear uniform work clothes, anti-static ring, anti-static gloves and so on, to ensure the humidity of the working environment, can also install anti-static ion fan, in order to effectively avoid the harm of static electricity on LED, improve work efficiency Rate. In addition, the antistatic performance of high-grade lamps is also relatively higher than that of ordinary led.
The control methods of LED wall washing lamp are divided into two types. In fact, internal control refers to setting the lighting program directly in the lamp, which can not be adjusted from the outside, and the light can not be changed, while external control refers to the external link controller, which determines the irradiation effect through regulation.
Outdoor lighting project should also pay attention to the waterproof problem: whether it is led wall washing lamp, or LED projection lamp, as long as it is used in outdoor lighting, we should pay attention to the waterproof problem, and seal and moisture-proof treatment. If we do not pay attention to the waterproof problem, it will have a more serious impact on the use of LED lamps.
In order to reduce the cost, many wall washing lamp manufacturers use the power supply mode of resistance capacitance step-down, which affects the life of LED products. When we choose to use, we choose LED lamps with special switching power supply. Although the cost is high, it also avoids the trouble caused by frequent damage.
In the production process of high-power wall washing lamp, anti-static measures need to be paid attention to, such as the manufacturer to develop special work regulations, staff should wear uniform work clothes, anti-static ring, anti-static gloves and so on, to ensure the humidity of the working environment, can also install anti-static ion fan, in order to effectively avoid the harm of static electricity on LED, improve work efficiency Rate. In addition, the antistatic performance of high-grade lamps is also relatively higher than that of ordinary led.
